Shark Rotator NV600 Series User Manual

19
1-800-798-7398
To keep your vacuum’s
suction power optimal, follow
these instructions. Make
sure unit is off and cord is
unplugged.
MAINTENANCE
RECOMMENDED
FILTER CLEANING
SCHEDULE:
Pre-Motor Filter Kit
(Foam & Felt)
XFF600
Clean every 3 months.
Post-Motor Filter
(HEPA)
XHF600
Clean once a year.
EMPTYING THE DUST CUP
1 Lift the dust cup off the
pod by pulling up on the
release latches on the
sides of the dust cup
handle.
2 Hold dust cup over a trash
bin and press the bottom
dust-cup release latch.
STEP 1 STEP 2
WARNING: To reduce
the risk of shock and
unintended operation,
turn power off and
unplug unit before
servicing.
Hand wash with
water only to prevent
damage from
cleaning chemicals.
Allow ALL filters
to dry completely
before replacing
in the vacuum to
prevent liquid from
being drawn into
electric parts.
IMPORTANT: Do not use
soap when cleaning the
HEPA filter.

Shark Rotator NV600 Series Specifications

General

Brand	Shark
Model	Rotator NV600 Series
Category	Vacuum Cleaner
Language	English