Shark Rotator NV600 Series - Cleaning the Filters

20
sharkclean.com
3 Press top dust-cup
release latch to access
dust screen and remove
built-up debris asrequired.
CLEANING THE FILTERS
1 Pre-Motor
(foam and felt):
With the dust cup
removed, take out the
foam and felt filters, and
rinse with water. Tap loose
dirt off filters between
washes asneeded.
2 Post-Motor (HEPA):
To access the HEPA filter,
reach under the grill, pull
the latch forward, and
pull the grill away from
the vacuum. Remove and
rinse the HEPA filter.
STEP 3
HEPA
FELT FILTER
FOAM FILTER
FILTER FRAME