sharkclean.com sharkclean.com
WHAT DOES THE BRUSHROLL INDICATOR
LIGHT MEAN?
Solid Green: The brushroll is spinning and
working as it should.
Solid Red: There is a jam in the brushroll
area. Turn o the vacuum and unplug it, then
remove any blockages in the nozzle.
Flashing Red: The motorized floor nozzle is
overheating. Turn o the vacuum, unplug it,
and remove any blockages. Let the vacuum
cool down for at least 60 minutes before
restarting. See Troubleshooting section for
more information.
No Light: The brushroll is o because the
vacuum is in Hard Floormode.
WHOLE-HOME CLEANING WHOLE-HOME CLEANING
SETTINGS
NOTE: For deep cleaning per ASTM F 608 (embedded dirt
in carpets) please set to Carpet/Low Pile.
BRUSHROLL INDICATOR LIGHT
INDICATOR LIGHT
CLEANING MODES
To engage brushroll, turn power on, select a
surface setting, then step on floor nozzle and
tilt handle back.
UPRIGHT LIFT-AWAY®
ABOVE-FLOOR ABOVE-FLOOR—EXTENDED REACH
Wand
Release
Handle
Press the Handle button to detach the handle
to clean above-floor areas. Insert cleaning
tools directly into handle.
L
i
f
t
A
w
a
y
®
Slide the selector switch to the
appropriate surface setting:
Thick Carpet/Area Rug
For more maneuverability on thick
carpets and reduced suction on delicate
area rugs.
Carpet/Low Pile Cleaning
The brushroll will spin quickly in this
setting to pick up stuck on debris.
Hard Floor Cleaning
The brushroll will not spin in this setting.
Press the Wand Release button to detach
the wand to clean with more reach. Insert
cleaning tools directly into wand.
Press Lift-Away button to lift pod o
motorized floor nozzle. You are now ready to
clean those hard-to-reach places.
NOTE: All accessories are compatible with both the wand and the handle.
To Next Page
Loading...
Need help?
General
