Shark Rotator NV680 N Series - Changing Your Floor Nozzles (Dust-Away Pro); Motorized Floor Nozzle Use; Dust-Away Pro Use; Important Dust-Away Pro Note

15 16
1-800-798-7398 sharkclean.com
Wand Release
CLICK
CHANGING YOUR FLOOR
NOZZLES (DUST-AWAY
™
PRO)
1 Press Wand Release button to remove wand from
motorized floor nozzle.
Insert wand into the Dust-Away Pro.
2 Press Lift-Away
®
button to lift pod off
motorized floor nozzle. Hold pod in hand
to clean in Lift-Away mode.
3 To clean in upright mode, place pod onto
wand and slide down to connect to the
Dust-Away
™
Pro.
STEP 1 STEP 2 STEP 3
Dust-Away
Pro
Use the Dust-Away Pro to
pick up debris and wipe away
fine dust on hard floors.
Motorized Floor
Nozzle
Use the motorized floor nozzle
for deep-cleaning carpets and
picking up large debris on
hard floors.
If your vacuum comes
with a Dust-Away
™
Pro,
use these instructions�
To purchase a
Dust-Away Pro, go
to sharkclean�com
IMPORTANT: Do not
use the Dust-Away Pro
Attachment without the
microfiber pad attached.