0800 862 0453
4
ASSEMBLY
STEP 1 STEP 2 STEP 3 STEP 4 STEP 5
1 Place the selected floor nozzle on the floor and insert
the wand.
2 Insert the handle into the wand.
3 Slide the pod onto the wand.
4 Slide the hose clip into the notch at the back of the
wand.
5 Insert the 2-in-1 Crevice Tool and Articulated
Upholstery Tool into the accessory posts as shown.
TIP: For quick cord access, rotate upper hook down and
remove cord. Rotate back for cord storage.
SLIDE
CLICK
To Next Page
Loading...
