Shark Rotator NV681 - Filter Cleaning Procedures

20
sharkclean.com
ENGLISH
3 Press top dust cup release
latch to access dust
screen and remove built-
up debris asrequired.
CLEANING THE FILTERS
1 Pre-Motor
(foam and felt):
With the dust cup
removed, take out and
rinse the foam and felt
filters with water. Tap
loose dirt off filters
between washes
asneeded.
2 Post-Motor (HEPA):
To access the HEPA filter,
reach under the grill and
pull the Filter Access
latch to remove the grill.
Remove and rinse the
HEPA filter.
STEP 3
HEPA
FELT FILTER
FOAM FILTER
FILTER FRAME
Filter Access
Accès au filtre