To Next PageTo Next PageWhat causes excessive vibration in the delivery line of my Shark Pressure Washer?
Excessive vibration in the delivery line of your Shark Pressure Washer is caused by valves functioning irregularly. Check and replace if necessary.
What causes presence of water in oil in my Shark Pressure Washer?
The presence of water in the oil of your Shark Pressure Washer can be due to a worn oil seal (check and replace if necessary), high air humidity (check and change oil twice as often), or worn or bad packing (check and replace if necessary).
Why won't the burner motor run on my Shark SGP-302517?
If the burner motor won't run on your Shark Pressure Washer, it could be due to a seized fuel pump (replace the fuel pump), a loose or misaligned burner fan (position correctly and tighten the set screw), a defective control switch (replace the switch), a loose wire (check and replace or tighten the wiring), or a defective burner motor (replace the motor).
General| Brand | Shark |
|---|---|
| Model | SGP-302517 |
| Category | Pressure Washer |
| Language | English |
