Flashing Red: The motorized floor nozzle is overheating. Turn your vacuum off and wait a minimum
of 45 minutes for it to cool down.
NOTE: For deep carpet cleaning per ASTM F 608 (embedded dirt in carpets), setting II, Carpet. For
deep carpet cleaning per ASTM F 608, set to MAX suction and Carpet.
CLEANING MODES
To engage brushroll, place foot on floor nozzle and tilt handle back.
Press the Handle Release button to detach the handle from the wand.
Press the Wand Release button to detach the wand from the pod.
To Next Page
Loading...
