Shark V1917 User Manual (English)

Questions and Answers:

B
Briana PadillaJul 30, 2025
What to do if my Shark V1917 sweeper will not operate?
- W
  william79Jul 30, 2025
  If your Shark Steam Cleaner sweeper isn't operating, several factors could be at play. First, ensure the batteries are fully charged. Next, verify that the electrical outlet supplying the charging adapter has power by checking the fuse or breaker and replacing/resetting if necessary. Also, make sure the wire terminal connectors are securely attached to the battery. Finally, check for any obstructions in the rotating brush; if present, clear them and restart the unit after turning it off for 10 seconds. If these steps don't resolve the issue, the unit may need servicing.
J
Jasmine MillerAug 5, 2025
What to do if my Shark V1917 sweeper will not pick-up?
- D
  Dr. Melinda Montes DVMAug 5, 2025
  If your Shark Steam Cleaner sweeper isn't picking up, the dust container might be full, so empty it. Alternatively, the unit may need recharging, so ensure it is fully charged.
S
Sue JohnsonAug 11, 2025
What to do if the rotating brush will not pick up with my Shark V1917?
- T
  Taylor MoranAug 11, 2025
  If the rotating brush on your Shark Steam Cleaner isn't picking up, it could be due to a clog. Check for excessive material on the brush or in the bottom of the sweeper, and remove any obstructions from the brushes or sweeper. Also, the dust container might be full; in that case, empty and clean it.
S
Samuel PughAug 17, 2025
Why is my Shark V1917 Steam Cleaner sweeper not charging?
- R
  Rhonda DavisAug 17, 2025
  If your Shark Steam Cleaner sweeper isn't charging, start by checking the electrical outlet to ensure it's working correctly by plugging in another appliance. If the outlet is functional, the charging adapter may be faulty and needs replacement. Also, make sure that the unit is in the “Off” position. If problems persist, the batteries may no longer be functioning.
J
Jennifer CrawfordAug 25, 2025
Why is dust escaping from my Shark V1917 sweeper?
- S
  Shawn Finley PhDAug 25, 2025
  If dust is escaping from your Shark Steam Cleaner sweeper, it's likely that the dust container is full. Empty the dust container to resolve this issue.