To Next PageTo Next Page
Need help?Do you have a question about the Sharp 13VT-L200 and is the answer not in the manual?
General| Screen Size | 13 inches |
|---|---|
| Aspect Ratio | 4:3 |
| VCR Type | VHS |
| Audio Output | Mono |
| Product Type | TV VCR Combo |
| Tuner | Analog |
| VCR | Yes |
| Display Type | CRT |
| Remote Control | Yes |
| Inputs | Composite |
| Outputs | Composite |
Procedures for safely servicing the high voltage system and picture tube.
Guidelines for managing X-radiation and high voltage limits during servicing.
Safety checks before returning the receiver to the user, focusing on fire and shock hazards.
General safety information regarding special safety-related parts and their characteristics.
Identifies and describes the location of controls on the front and rear of the unit.
Details the buttons and functions of the remote control unit.
Instructions for installing batteries in the remote control.
Details the receiver's circuit protection mechanisms and fuse details.
Procedures for testing the X-radiation protector circuit for proper operation.
Steps to check and verify the high voltage output within safe limits.
Steps and precautions for mounting the cassette controller during reassembly.
Instructions for connecting the VCR mechanism to the main printed wiring board.
Identifies and explains the function of major mechanical parts from the top view.
Identifies and explains the function of major mechanical parts from the bottom view.
Identifies key test points on the main unit for VCR circuitry adjustments.
Covers adjustments related to servo circuits, including head switching and tracking.
Procedure for adjusting vertical sync for still picture playback.
Comprehensive flowcharts for diagnosing VCR section issues, including power, cassette, drum, and servo systems.
Flowcharts for diagnosing TV section problems, covering power, picture, sound, vertical scan, and remote control.
Diagram showing the layout of Printed Wiring Board B.
Diagram showing the layout of Printed Wiring Board D.
Diagram showing the layout of Printed Wiring Board C.
Shows the general functional blocks of the VCR section.
Illustrates the servo control system blocks within the VCR.
Details the system control and interface blocks of the VCR.
Maps the flow of video signals through the VCR section.
Illustrates the audio processing signal paths within the VCR.
Provides notes on reading resistance, capacitance, and component notations.
Specifies conditions for measuring DC voltages in the unit.
Outlines conditions and procedures for measuring signal waveforms.
Displays various signal waveforms and their characteristics at different test points.
Shows the wiring side layout of the CRT unit's printed wiring board.
Displays the wiring side layout of the Front AV unit's printed wiring board.
Illustrates the wiring side layout of the POWER unit's printed wiring board.
Shows the wiring side layout of the MAIN unit's printed wiring board.
Displays the chip parts side layout of the MAIN unit's printed wiring board.
Lists replacement parts for the picture tube assembly.
Lists components for the Main Unit (PWB-A), including ICs, transistors, diodes, etc.
Lists components for the Power Unit (PWB-C).
Lists components for the CRT Unit (PWB-B).
Lists all mechanical parts and their references for the mechanism chassis.
Lists parts related to the cassette housing control mechanism.
Lists items supplied with the product that are not replacement parts.
Lists materials used for packing the product.
