Sharp 770SH - World Clock; Countdown Timer

Organiser & Tools 107
World Clock
Setting the Time Zone
“Organiser & Tools”
→ “World Clock”
1. Press [Edit] and select “Set Time Zone”.
The current time zone is indicated by red line on the
world map.
2. Press c or d to change the time zone.
3. Press B.
To Set the Custom Time Zone
“Organiser & Tools”
→ “World Clock”
1. Press [Edit] and select “Set Time Zone”.
2. Press [Options] and select “Set Custom Zone”.
3. Enter the desired city name and time.
Setting the Daylight Saving
“Organiser & Tools”
→ “World Clock”
1. Press [Edit] and select “Daylight Saving”.
2. Select “On” or “Off”.
Countdown Timer
“Organiser & Tools” → “Countdown Timer”
1. Enter the time to count.
You can set the time from 1 second to 60 minutes.
2. Press B to start counting.
3. Press B to pause.
Press B again to continue counting.
4. If the countdown has finished, press [Cancel] and
then press B to start the countdown again.
Editing the Countdown Time
1. In the countdown start screen, press [Options] and
select “Edit”.
2. Modify the desired time.
(M 7-6)
(M 7-7)