Sharp 770SH Declaration Of Conformity

Voice Call/Video Call Functions 29
To Make a Video Call With the Video Telephony
Key
1. Press S .
Your image is displayed in the upper part of the
screen.
2. Enter the phone number or press [Options] and
select “Call Log”, “Contacts” or “Enter Number”.
3. Once the desired number has been selected, press
S.
To Make a Video Call Using Speed Dial
1. Press S .
Your image is displayed in the upper part of the
screen.
2. Press and hold any of the digit keys (G to O).
The phone number saved in the speed dial list is
dialled. When connected, the image of the called
party is displayed in the upper part of the screen and
yours in the lower left.
Answering a Video Call
When an incoming call is detected, the phone rings.
1. Press D to answer the call with video or press
[Options] and select “Hide Picture” to answer with
voice only.
Tip
• If you have subscribed to the Calling Line
Identification (CLI) service and the caller’s network
sends the number, the caller’s number is displayed on
the screen. If the caller’s name and number are saved
in the Contacts List, the caller’s name is displayed on
the screen.
Rejecting an Incoming Call
1. Press F while the phone is ringing to reject a call
you do not wish to answer.
Letting the Caller Know You are Unavailable
1. Press [Busy] while the phone is ringing to send a
busy tone to the caller of an incoming call letting
them know that you cannot answer the call.

Sharp 770SH Specifications

General

Brand	Sharp
Model	770SH
Category	Cell Phone
Language	English