28 Voice Call/Video Call Functions
Making a Video Call
Note
• Video calls can only be made and received if both
parties have 3G capable phones and 3G coverage.
See “Display Indicators (Main Display)” on
page 19.
• Make sure that the battery is fully charged and the
signal is strong before using this function.
• Turn the loudspeaker on or use a handsfree kit so that
you can talk while looking at the video call screen on
the main display.
Status Indicators
1. Sub screen for your image
2. Elapsed time
3. Main screen for the other party’s screen
4. Other party’s name or phone number
Making a Video Call
To Make a Video Call by Entering the Phone
Number First
1. Enter the area code and the phone number you wish
to dial.
2. Press [Options] and select “Video Call” or press
S to dial.
If you enter the wrong number, press [Clear] to
delete the number to the left of the cursor.
When connected, the image of the called party is
displayed in the upper part of the screen and yours
in the lower left.
Tip
• If the called party’s phone is not video call enabled,
you can press F and enter the phone number again
to make a voice call.
1
3
2
4
To Next Page
Loading...
Need help?
General
