Sharp 770SH Declaration Of Conformity

112 Settings
Resetting Profile Settings
“Settings”
→ “Phone Settings” → “Profiles”
1. Highlight the profile you wish to reset.
2. Press [Options] and select “Set to Default”.
3. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 124.
Volume
You can adjust the volume for incoming voice calls,
SMS/MMS/Email messages and other sounds
(“General Volume”) to one of six levels, or set an
increasing volume for all of these except “General
Volume”.
“Settings”
→ “Phone Settings” → “Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Volume”.
4. Select “For Incoming Call”, “For New Message” or
“General Volume”.
5. Press a (or d) to increase the ringer volume or
press b (or c) to decrease the ringer volume and
then press B.
To select “Increasing Volume”, press a (or d) at
level 5.
To select “Silent”, press b (or c) at level 1.
Tip
• You can select from two levels or an increasing
volume, when selecting the “Silent” profile.
Assigning a Ringtone for an Incoming Call
You can set a ringtone for incoming voice and video
calls. You can select from different tones including
patterns, sound effects and melodies or set a sound in
Saved Sounds as the default ringtone.
“Settings”
→ “Phone Settings” → “Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Ringtone/Ringvideos”.
4. Select “For Voice Call” or “For Video Call”.
5. Select “Assign Tone”.
6. Select “Preset Sounds” or “My Sounds”.

Sharp 770SH Specifications

General

Brand	Sharp
Model	770SH
Category	Cell Phone
Language	English