Sharp 770SH Declaration Of Conformity

126 Settings
To Show or Hide Your Phone
“Settings”
→ “Connectivity” → “Bluetooth” →
“Visibility”
1. Select the desired visibility settings.
“Show My Phone”: Allows other devices to
recognise your phone.
“Hide My Phone”: Hides your phone from
other devices.
To Search for Devices to be Paired
A maximum of 16 devices can be searched for.
“Settings”
→ “Connectivity” → “Bluetooth” →
“Search for Devices”
1. Select the desired device for pairing.
2. Enter the device passcode.
Note
• You can search for devices even when the Bluetooth
wireless function is off. Once pairing is started, the
phone turns the Bluetooth wireless function on
automatically.
• You can only select one device for pairing. To change
the paired device, see “To Activate the Paired
Device”.
Tip
• You can save battery power by turning the Bluetooth
wireless function off while it is not in use. Turn the
Bluetooth wireless function off in “To Turn On or
Off” on page 125 or in “To Turn Off Automatically”
on page 128.
• During a call, you can divert voice calls to the paired
handsfree device. Press [Options], select “Transfer
Audio” and then “To Handset” or “To Bluetooth”.
To Activate the Paired Device
Paired devices are listed by tabs for all devices and for
handsfree devices.
“Settings”
→ “Connectivity” → “Bluetooth” →
“Paired Devices”
1. Press d to switch to the list for handsfree devices.
2. Select the desired device you wish to activate.
(M 12-1-2)
(M 12-1-3)
(M 12-1-4)

Sharp 770SH Specifications

General

Brand	Sharp
Model	770SH
Category	Cell Phone
Language	English