E-7
Sound bar preparation
Safety wires (not supplied) are useful to prevent the sound bar from falling off.
Loop the safety wires (not supplied) into
each hole as shown and tie the safety
wires to the TV stand.
Falling prevention
You may change the stand if the legs of the front speakers are short and the TV stand interferes with this unit, you can
increase the height by replacing it with the included long stand.
2 Tighten all the stand as shown.
When removing the stand from sound bar,
place the sound bar on a cushion or soft
cloth to avoid damage.
1 Remove the stand as shown.
Note:
In case the stand is too tight to be removed,
please use a suitable cloth to prevent slip while
removing it.
Using the short stand
To Next Page
Loading...
