Contents
1. Part Names
2. Basic Operation
3. Menu Operation
4. USB Media
5. Connecting Other
Devices
1. Connecting 8K Output-
compatible
Device/Quad-screen
display（4K or less)
5. Connecting 4K Output-
compatible Device
7. Viewing HDR Video
(INPUT1, INPUT7,
INPUT8)
9. Using the HDMI CEC
11. Connecting Recorder,
Player, etc.
21. Connecting Audio
Device
22. Connecting PC
6. Operating the Monitor
Using a PC (IP control)
7. Troubleshooting
＞
＜
Connecting Other Devices
Connecting Recorder, Player, etc.
Switching to the screen of a BD recorder, etc.
To change displayed name of input source as desired
• The device names displayed in the input menu, etc. can be changed to the names of the devices connected to
INPUT1 to 8.
1. Press INPUT, followed by / to select any input to be renamed (INPUT1 to 8), and then press ENTER
2. Press MENU to display the Menu, followed by / / / to select "Setup", and then press ENTER
3. Press
/ / / to select " (Option)" - "Terminal setting"
4. Press / to select "Input label", and then select the name to be displayed
• If you want to input a desired device name, select "EDIT" and determine the name. (Entering Letters
page 3-45)
5-18
4/9/2020 Sharp operation manual
To Next Page
Loading...
Need help?
General
