Sharp 903SH - Page 47

46 Camera
Selecting the Scene
You can select the appropriate mode by scene when you take the
picture.
“Camera”
→ [Options] → “Modes” → “Scene”
1. Select the desired scene.
The following eight modes are available:
“Automatic” ( ): Automatically adjusted to surroundings.
“Night” ( ): Suited for night photography.
“Sports” ( ): Suited for moving objects.
“Characters” ( ): Suited for high-contrast subjects such as
text.
“Pet”( ): Suited for moving objects at short range.
“Against Sun” ( ): Suited to avoid objects being silhouetted
against the light.
“Portrait” ( ): Suited for a portrait.
“Portrait in Dark” ( ):
Suited for a portrait indoors or in dim light.
Selecting the Picture Effects
You can take a picture with special effects.
“Camera”
→ [Options] → “Modes” → “Camera Effects”
1. Select the desired effects.
The following five modes are available:
“Off”: The camera effect is cancelled.
“Sepia”: Creates a sepia-tone image.
“Monochrome”: Creates a black and white image.
“Negative”: Creates a negative image.
“Sketch”: Creates a sketch-like image with contours of
objects outlined.
Note
• You cannot use the Camera Effects function for picture sizes larger
than 480
× 640 dots.
Continuous Shoot
There are various modes for taking continuous shots.
“Camera”
→ [Options] → “Modes” → “Continuous Shoot”
1. Select the desired mode.
The following continuous shoot modes are available:
“Off”: The continuous shoots are cancelled.
“4 Pictures”/“9 Pictures” ( / ):
Takes 4 or 9 pictures continuously.
After selecting this mode, select from five
types of speed or “Manual”.
“Overlapped” ( ): Overlaps continuous pictures into one
picture and makes an afterimage.
After selecting this mode, select “Fast” or
“Normal”.
“Bracket” ( ): Takes 9 continuous pictures with various
colours and brightness levels.
After selecting this mode, select “Fast” or
“Normal”.