Sharp 903SH - Scanner

86 Organiser & Tools
Scanner
With the built-in digital camera, you can read texts and barcodes in
Jan format and QR codes, and create QR codes. The scanned data
can be saved as a Contacts List entry, URL, Email address and text.
Note
• When scanning does not take place, it may be due to one of the
following reasons: type or size of barcode, scratches, dirt, damage,
print quality, light reflection, etc.
Reading Barcodes
“Organiser & Tools”
→ “Scanner” → “Scan Barcode”
1. Display the barcode using the external camera.
2. Press .
3. Press [Options] and select the desired option.
The options vary depending on the scanned data.
“Open Link”: The browser opens the URL.
“Copy URL”: The URL is copied.
“Send Message”: The result is sent as SMS or MMS.
“Copy”: The result is copied.
To Use the Continuous Scanning
1. In scanning mode, press [Options] and select “Continuous
Scan”.
2. Select “On” or “Off”.
Opening a Barcode Picture
“Organiser & Tools”
→ “Scanner” → “Open Barcode”
1. Select the desired picture data for barcode.
Viewing the Scanned Data
“Organiser & Tools”
→ “Scanner” → “Scanned Results”
1. Highlight the data you wish to view, then press .
Creating QR Codes
“Organiser & Tools”
→ “Scanner” → “Create QR Code”
1. Select the desired option.
“Text Input”: Create a QR code using the text you enter.
“My Items”: Create a QR code using the My Items data.
2. Enter the desired text or select the desired data, then press
.
3. Press to save.
Tip
• The QR code is saved in a PNG format file.
(M 7-5)