Sharp 903SH - Page 60

Messaging 59
To Set Languages for Cell Broadcast Messages
A
→ “Messaging Settings” → “Cell Broadcasts” →
“Settings”
→ “Language”
The current language is displayed.
1. Press .
2. Press to check.
3. Press [Save].
To Subscribe to Cell Broadcasts
Select the page of the cell broadcast message that you want.
A
→ “Messaging Settings” → “Cell Broadcasts” →
“Settings”
→ “Set Info Subjects” → [Options]
1. Select “Add/Remove”.
2. Select the desired page.
3. Press [Back].
Tip
• If the desired page is not in the list that appears in step 2, select
“Create Subject” in step 1, then enter the subject code to add a
page. For details on the subject code, contact your service
provider.
Area Info
The Area Info is the message information that operators send to
subscribers in certain areas.
When you receive Area Info, the message (area code) is displayed in
standby.
To Enable/Disable Area Info
A
→ “Messaging Settings” → “Area Info”
1. Select “On” or “Off”.
Note
• This function may not be available on all mobile phone networks.
Contact your service provider for more information.
• If Area Info is set to “On”, the standby time will decrease.
(M 4-9-6)