Sharp 903SH - Page 96

Settings 95
Message Notification
When receiving messages, your phone will notify you of their arrival
with the ringtone or ring video you specify.
“Settings”
→ “Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Ringtone/Ringvideos”.
4. Select “For New Message”.
5. Select “Assign Tone” or “Assign Video”.
If “Assign Tone” is selected, select “Preset Sounds” or “My
Sounds”.
6. Highlight the desired ringtone or ring video clip.
For details on selecting a ringtone or a ring video, see “Assigning
a Ringtone” or “Assigning a Ring Video Clip File” on page 94.
7. Press [Options] and select “Assign” for “Preset Sounds” or
“Select”.
8. Select “For New Message” and select “Duration”.
9. Enter the desired duration.
Keypad Tones
When the keypad tone is set on, you will hear a confirmation tone
each time you press any keys.
“Settings”
→ “Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “System Sounds”.
4. Select “Keypad Tones”.
5. Highlight the desired tone pattern.
6. Press [Options] and select “Assign”.
Warning Tone
Your phone emits a warning tone when an error occurs.
“Settings”
→ “Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “System Sounds”.
4. Select “Warning Tone”.
5. Select “Tone” or “Duration”.
For “Tone”, select “Off”, “Preset Sounds” or “My Sounds”.
For “Duration”, select the desired time between 0.5 and 2
seconds.