Sharp AE-X13BE - Page 39

39
AY-XP08/10/13CE
AE-X08/10BE-C
AE-X13BE
FOR OUTDOOR UNIT [AE-X08BE-C/X010BE-C/X13BE]
CAUTION : DISCONNECT THE UNIT FROM THE POWER SUPPLY BEFORE ANY SERVICING
1. Loose a screw fixing the side cover.
Right side view Left side view
Right side view Left side view
Front view
2. Loose the unit to unit cord.
3. Loose a screw fixing the cord clamp.
4. Loose 4 screws fixing the top panel.
5. Loose 6 screws fixing the front panel.
6. Cut 3 nylon bands.
7. Disconnect following connectors and each wire.
Choke coil(two terminal)
Fan motor
Thermistor
Reverse valve (AE-X08BE-C/10BE-C/13BE)