Sharp AF-T908X User Manual

6
AF-T908X
AF-R908X
AF-R1108X
AF-R1208X
NOTES ON FAN SPEED
Fan and cooling at maximum performance.
Unit is preset at factory to HIGH COOL.
Fan operates at medium speed; cooling power at medium.
Cooling for sleeping comfort with low fan speed.
FAN ONLY OPERATION
This setting can be used to circulate air whenever cooling is not desired.
The fan will operate at medium speed.
PROCEDURE PAD DISPLAY / INDICATOR
TO CHANGE FAN SPEED
SELECTOR
During operation
Touch SELECTOR pad and select the desired fan
speed.
• SELECTOR indicator will light in order
as you touch.
HIGH COOL
MED COOL
LOW COOL
FAN ONLY
HIGH COOL
MED COOL
LOW COOL
PROCEDURE PAD DISPLAY / INDICATOR
• SELECTOR indicator FAN ONLY will
light. After 10 seconds, the compressor
will stop and the unit will operate in FAN
ONLY mode.
During operation
Touch SELECTOR pad and select FAN ONLY.
SELECTOR
The fan speed setting or FAN ONLY setting of the latest speed will be memorized and will light the next time unit is turned
on.
ENERGY SAVER
During normal operation, the thermostat automatically controls cooling and the fan runs continuously whenever the air
conditioner is in operation. When the ENERGY SAVER is set, the thermostat automatically controls cooling and the fan
automatically stops when the compressor is not operating. (Fan will stop in 30 seconds after the compressor stops.)
PROCEDURE PAD DISPLAY / INDICATOR
ENERGY
SAVER
• ENERGY SAVER indicator will light.
• ENERGY SAVER indicator will go off.
ENERGY
SAVER
During cooling operation
1. Touch ENERGY SAVER pad.
2. To cancel, touch
ENERGY SAVER pad again.
NOTE : ENERGY SAVER cannot be set during FAN ONLY mode operation.

Sharp AF-T908X Specifications

General

Brand	Sharp
Model	AF-T908X
Category	Air Conditioner
Language	English