COOL and DRY mode Horizontal air flow
10
ADJUSTING THE AIR FLOW DIRECTION
VERTICAL AIR FLOW DIRECTION
The air flow direction is automatically preset in each mode as follows for optimum
comfort:
HOW TO ADJUST THE AIR FLOW DIRECTION
The adjustment range is narrower
the SWING range in order to pre-
vent condensation from dripping.
Hold the horizontal adjustment
louvre as shown in the diagram
and adjust the air flow direction.
Press the SWING button on the remote con-
trol once.
• The vertical adjustment louvre will change
its angle continuously.
Press the SWING button again when the ver-
tical adjustment louvre is at the desired posi-
tion.
• The louvre will stop moving within the range
shown in the diagram.
• The adjusted position will be memorized
and will be automatically set to the same
position when operated the next time.
Adjustment range
HORIZONTAL AIR FLOW DIRECTION
CAUTION
Never attempt to adjust the vertical adjustment louvres manually.
• Manual adjustment of the vertical adjustment louvre can cause the unit to malfunction
when the remote control is used for the adjustment.
• When the vertical adjustment louvre is positioned at the lowest position in the COOL or
DRY mode for an extended period of time, condensation may result.
To Next Page
Loading...
Need help?
General
