Sharp AH-MP20 - Outdoor Unit Disassembly; Control Box Disassembly

MODEL: AU-MP20
[2] OUTDOOR UNIT
1. Disassembling procedure of the control box
1) Loose 3 screws fixing the control cover. 5) Loose 1 screw fixing the cabinet (rear side).
2) Loose 1 screw fixing the side cover. 6) Loose 3 screw fixing the cabinet (right side).
3) Loose 8 screws fixing the side cover R. 7) Loose 1 screw fixing the cabinet (front side).
4) Loose 2 screws fixing the cabinet. 8) Loose 7 screws fixing the rear cabinet.
24