Sharp AH-XP10UXD - Vertical Air Flow Direction; Horizontal Air Flow Direction

EN-7
HORIZONTAL AIR FLOW DIRECTION
(For Premium models)
1
Press the SWING button ( ).
• The horizontal airow louver will swing.
• The lighting bar will wave to show the
swing direction.
For more information, refer to page EN-13.
(For XP10/13UXD, XP10/15UF models only)
2
Press the SWING button ( ) again
to stop at the desired position.
CAUTION:
Never attempt to adjust the louvers manually.
• Manual adjustment of the louvers can cause
the unit to malfunction.
• When the vertical adjustment louver is
positioned at the lowest position in the COOL
or DRY mode for an extended period of time,
condensation may result.
NOTE:
• The adjustment range is narrower than the
swing range in order to prevent condensation
from dripping.
(For Standard models)
Hold the horizontal airow louver lever
and adjust the airow direction.
VERTICAL AIR FLOW DIRECTION
1
Press the SWING button ( ) to set
the desired airow direction.
In AUTO mode, airow direction cannot be
set to “ ”.
ADJUSTING THE AIR FLOW DIRECTION
1
SENSOR
1
2
SENSOR
Louver lever