Sharp AL-1045 - 6 Special Functions; About the Special Functions of the Al-1555; Two-Sided Copying

52
This chapter describes the special functions of this unit. Use these functions as
needed.
ABOUT THE SPECIAL FUNCTIONS OF
THE AL-1555
Two sided copying
When copying from the RSPF, two-side originals can be copied automatically
without having to manually turn them over. Automatic two-sided copying can also be
performed without using the RSPF. When copying from one-sided originals to two-
sided copies, copying orientation can be selected between Turn on Long Edge and
Turn on Short Edge.
Making two-sided copies
1
Place the original on the original table or in the RSPF. (see
"ORIGINAL PLACEMENT" (p.47).
2
Select two-sided copy mode.
• When making two-sided copies from the original table, the paper size
must be A4, letter. When making two-sided copies from the RSPF,
A4, B5, A5, letter, legal, and invoice sizes can be used. Non-standard
size paper cannot be used.
• When making two-sided copies, the multi-bypass tray cannot be used.
• When using two-sided invoice size originals from the RSPF, be sure
to place them in the landscape orientation. Otherwise, an original
misfeed will occur.
A
A
A A
A
A
A A
Turn on Short EdgeTurn on Long Edge
6
SPECIAL FUNCTIONS