Sharp AM-300 User Manual

3. Remove the fill plug and clean out all the remaining toner
from the hopper.
4. Fill the hopper with toner for use in the Sharp AM-90D
(AM-30DC) cartridge, and replace the fill plug.
5. Slide the end cap so it fits over the top tab.
Install the two screws.
SHARP AM-300 • 400 • 900 EASY TO REMANUFACTURE CARTRIDGE INSTRUCTIONS
© 2012 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
www.uninetimaging.com

Sharp AM-300 Specifications

General

Brand	Sharp
Model	AM-300
Category	All in One Printer
Language	English