Preparation (Continued)
CABLE
TV
(CATV) CONNECTION
• A 75-ohm coaxial cable connector is built into the LCD TV set for easy hookup. When connecting the 75-ohm coaxial
cable to the LCD TV set, screw the 75-ohm cable to the ANT terminal.
• Some cable
TV
companies offer "premium pay channels". Since the signals
of
these premium pay channels are
scrambled, a cable
TV
converter/descrambler
is
generally provided
to
the subscriber by the cable
TV
company.
This converter/descrambler is necessary for normal viewing of the scrambled channels. (Set your TV to channel 3
or
4,
typically one
of
these channels
is
used. If this is unknown, consult your cable ,TV company.) For more specific
instructions
on
installing cable TV, consult your cable
TV
company. One possible method of utilizing the converter!
descrambler provided by your cable TV company is explained below.
Please note: An
RF
switch provided with two inputs (A and
B)
is required (not supplied).
"A"
position on the
RF
switch (not supplied):
You
can view all unscrambled channels by using the TV's channel keys.
"B" position
on
the
RF
switch (not supplied):
You
can view the scrambled channels via the converter!descrambler by
using the converter's channel keys.
RF switch (not supplied)
_.
Cable
TV
line
Cable
TV
converter!
descrambler
(not supplied)
Two-set
A
11I;_-------
••
signal.
___
lIIftIlrlOUT~.
IN
splitter
B
~~
supplied)
.,
.•...
,
.•
"
..
,',.,',',;.:,'
..
"
..
:
..
",
INOTE >
• Consult your SHARP Dealer
or
Service Center for the type
of
splitter, RF switch
or
combiner that might be required.
POWER
AC INPUT terminal
(AC 120V)
Wall outlet
INOTE >
• Unplug the AC cord from the LCD
TV
set and wall outlet when LCD
TV
set is not to be used for a long period
of
time.
@g
To Next Page
Loading...
