LC-15S5U
OPERATION
MANUAL
ENGLISH
IMPORTANT:
To
aid reporting
in
case
of
loss
or
theft, please record the TV's
model and serial numbers
in
the space provided. The numbers
are located at the rear
of
the TV.
IMPORTANT INFORMATION
IModel No.:
Senal No.:
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS PRODUCT
TO
RAIN OR MOISTURE.
A
AA
---------_
......
The lightning flash with arrow-head symbol,
within an equilateral triangle, is intended to
alert the user to the presence
of
uninsulated
"dangerous voltage" within the product's
enclosure that may be
of
sufficient magnitude
to constitute a risk
of
electric shock to persons.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE
COVER
(OR BACK).
NO
USER-SERVICEABLE
PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The exclamation point within a triangle is
intended to alert the user to the presence
of
important operating and maintenance
(servicing) instructions
in
the literature
accompanying the product.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
CAUTION:
DO NOT PLACE THIS PRODUCT
ON
AN
UNSTABLE CART, STAND, TRIPOD, BRACKET, OR
TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS
DAMAGE
TO
THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE
RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE
MANUFACTURER'S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING
ACCESSORIES
RECOMMENDED
BY THE'
MANUFACTURER.
A
PRODUCT
AND
CART
COMBINATION SHOULD
BE
MOVED WITH CARE. QUICK STOPS, EXCESSIVE FORCE, AND
UNEVEN SURFACES MAY CAUSE THE PRODUCT AND CART COMBINATION TO OVERTURN.
I U.S.A. ONLY I
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly
approved by the manufacturer could void the user's authority to operate this equipment.
"Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40
of
the National
Electrical Code that provides guidelines for proper grounding and,
in
particular, specifies that the cable ground shall be connected to the
grounding system
of
the building, as close to the point
of
cable entry as practical." I U.S.A. ONLY I
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal
of
these materials
may
be
regulated due to environmental considerations. For disposal or recycling information, please contact your local
authorities or the Electronic Industries Alliance: www.eia.org
®1
To Next Page
Loading...
