Useful Features
~STEREO
SAP
MONO
Press ENTER. The tuner will search through all available
channels
in
your area and add them to the TV memory.
2
Repeat steps 1 to 3
of
Setting
the
AIR/CABLE.
Repeat steps 1 to 3
of
Setting
the
AIR/CABLE.
Press
./~
to select "CH MEMORY", and press
ENTER.
AV
MODE
DISPLAY
0.--0
~75'
...",
';u
Press
./~
to move the cursor to "CHANNEL", and use
<llllII/~
or Channel
Select
to select the desired channel
to be added or erased.
Press
./~
to move the cursor to "SKIP", and use
<llllII/~
to select "ON" or "OFF".
Press
MENU to exit.
Individual settings
of
programs can be adjusted.
•
Saving
broadcast
TV
channels
in
the
memory
•
Adding
weak
or
additional
channels
or
erasing
unwanted
channels
from
TV
memory
INOTE >
•
To
interrupt
CH
SEARCH, press MENU RETURN. CH SEARCH will
stop at the current channel and will not add any higher channels.
Press
<llllII/~
to select "SETUP".
Press
MENU to display the Menu screen.
Press
./~
to select "CH·SETUP", and press ENTER.
Press MENU to exit.
Press
./~
to select "AIR/CABLE", and press ENTER.
Press
./~
to
select the desired setting,
and
press
ENTER.
AV
MODE
DISPLAY
0"",,0
MENU
I
,
RETURN
~.
MENU
•.
",<,.'
•
•
Setting
the
AIR/CABLE
It is necessary to set the receiving mode to AIR or CABLE
channels to receive locally broadcast
TV
programs.
• EZ SETUP
When you move to
an
area with different broadcasting
signals, you may have to set the channel numbers and the
time with the EZ SETUP function.
To
activate EZ SETUP,
perform the following procedure.
CD
Press iJ.J'" to select "CH SETUP" in the
SETUP
screen (see
page 18), and press ENTER.
®.Press
iJ../T to select "EZ SETUP", and press ENTER.
® Press iJ../T to select "YES", and press ENTER.
Refer to page 14 for more information on EZ SETUP.
INOTE >
• Receivable channels
of
the LCD
TV
set are:
AI R channels: CABLE channels:
VHF: 2 through 13. 1 (HRC and IRC)
UHF:
14
through 69. 2 through 125 (STD, HRC and IRC)
INOTE >
• If CH SEARCH is performed again, the previously memorized
channels will be lost.
22 @
To Next Page
Loading...
