Part Names
of
the Main
Unit
Tilt the display by grabbing onto the
carrying handle while securely holding
down the stand with your other hand.
To
change the vertical angle of the LCD TV
set, tilt the screen up to 2.5 degrees forward
or
10
degrees backward. Please adjust
the angle so that the
LCD
TV set can be
watched most comfortably.
Headphone
jack
(0 )
Plug the headphone mini-plug into the headphone jack located
on the front
of
the main unit.
1....-
OPC (Optical
Picture
Control)
indicator
The
ope
indicator rights up green when
"ope"
is set to "ON".
(See page 19.)
1....-
__
POWER
indicator
POWER indicator lights up green when the power is on,
and red when
in
the standby mode (the indicator will not light when the main
power is off).
Upper
control
panel
CH
(v)/(A)
INPUT
VOL
(-)/(+)
MENU POWER
OPC (Optical
Picture
Control)
sensor
Remote
sensor
INOTE >
• INPUT, CH
(V}/(A),
VOL
(-}/(+)
and MENU on the main unit have the same functions as the same buttons on the remote control.
Fundamentally, this operation manual provides a description based on operation using the remote control.
• Plug the headphone mini-plug into the headphone jack located
on
the front
of
the main unit.
POWER
OPe
()
.....
~
...
::;
....
~
...
~
...
~tO..
.HeadPhones
............................
............................
T On-screen
display
VOLUME
10
1111111111·············································
Adjust the sound volume using
VOL
(+
)/(-)
on the
remote control.
INOTE >
• Headphones are not included in the supplied accessories.
• No sound is heard from the main unit speakers when a headphone mini-plug is connected into the headphone jack.
• Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.
10 @
To Next Page
Loading...
