Before Using the LCD
TV
Set
To
use your LCD TV set, perform steps below.
Check the supplied accessories. (See page
5.)
INPUT3/0UTPUT Terminal
Terminal for INPUT/OUTPUT connection.
INPUT1 Terminal (COMPONENT)
Terminal for component connection.
INPUT2 Terminal
Terminal for S-video connection.
Connect the antenna cable. (See page
8.)
Insert two "AAA" size batteries into the remote control. (See page
7.)
• Open the battery cover, and then insert batteries with their terminals corresponding to the
(+)
and
(-)
indications
in
the
battery compartment.
Connect with external devices. (See page 13.)
Connect the AC cord to the
AC
INPUT terminal
of
the LCD
TV
set and plug
in
the AC cord to the wall outlet.
(See page
9.)
Turn
on
the main power. (See page 15.)
CD
Press POWER
on
the upper side
of
the main unit.
® The POWER indicator located
on
the front of the main unit changes from red to green.
....
LpOWER
indicator
POWER
Start EZ SETUP. (See page
14.)
• The broadcasting channels will be memorized automatically.
6®
To Next Page
Loading...
