Basic
Operation
INPUT1
mode
INPUT1
I
480P
INPUT31
INPUT21
TV mode
INPUT2 mode
INPUT3 mode
Press INPUT to select the applicable input source. The
screen changes
in
order
of
INPUT1, INPUT2, INPUT3
and TV mode each time INPUT is pressed.
Turn on the power
of
the connected video equipment.
\\
MU~
VOL
CH
INM
II
\\
~~E§:§f
II
POWER
POWER
indicator
INOTE >
•
The
on-screen display disappears in a few seconds.
• Press POWER. The POWER indicator instantly changes
from red to green and the LCD
TV
set is turned on.
On-screen
display
I~
STEREO
SAP
MONO
•
To
turn off the main power,
pr~ss
POWER again.
CD®0
0CD®
INOTE >
INPUT1:
Used for video equipment connected to the
COMPONENT
input terminals.
INPUT2:
Used for video equipment connected to the IN PUT2
terminals.
The S-video input terminal is additionally provided for the
INPUT2 terminal.
If
both the S-video terminal and normal
video terminals are connected with cables, the S-video
input terminal takes priority.
INPUT3/0UTPUT:
INPUT3 mode is used to adjust the preset settings and
IN
or OUT can be selected. INPUT3 indication is not displayed
when
OUT
is selected.
To
turn
off
the
LCD TV
set
Press POWER. The POWER indicator will turn red.
To
turn
the
LCD
TV
set
back
on
Press POWER again. The POWER indicator will turn green.
@ 15
To Next Page
Loading...
