IMPOR,TANT SAFETY PRECAUTIONS (Continued)
•
Cleaning-Unplug
the
AC
cord from the
AC
outlet before cleaning the product.
Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol
cleaners.
• Water and
moisture-Do
not use the product near water, such as bathtub,
washbasin, kitchen sink and laundry tub, swimming pool
and
in
a wet basement.
•
Stand-Do
not place the product
on
an
unstable cart, stand, tripod or table.
Placing the product
on
an
unstable base can cause the product to fall, resulting
in
serious personal injuries as well as damage to the product. Use only a
cart, stand, tripod, bracket or table recommended by the manufacturer or sold
with the product. When mounting the product on a
wall",
be
sure to follow the
manufacturer's instructions. Use only the mounting hardware recommended by
the manufacturer.
• When relocating the product placed
on
a cart, it must
be
moved with utmost
care. Sudden stops, excessive force and uneven floor surface can cause the
product to fall from the cart.
•
Ventilation-The
vents and other openings
in
the cabinet are designed for
ventilation.
Do
not cover or block these vents and openings since insufficient
ventilation can cause overheating and/or shorten the life of the product. Do not
place the product
on
a bed, sofa, rug or other similar surface, since they can
block ventilation openings. This product is not designed for built-:in installation; do
not place the product
in
an
enclosed place such
as
a bookcase or rack, unless
proper ventilation is provided or the manufacturer's instructions are followed.
• The Liquid Crystal panel used
in
this product is made of glass. Therefore, it can
break when the product is dropped or applied with impact.
Be
careful not to
be
injured
by
broken glass pieces
in
case the Liquid Crystal panel breaks.
• Heat
sources-Keep
the product away from heat sources such as radiators,
heaters, stoves and other heat-generating products (including amplifiers).
• The Liquid Crystal panel
isa
very high technology product with 921,600 thin film transistors, giving
you
fine picture
details.
Occasionally, a few non-active pixels may appear
on
the screen as a fixed point of blue, green
or"
red.
Please note that this does not affect the performance
of
your product.
@3
To Next Page
Loading...
