Part Names
I--_[_ILO_
19
23
• When using the remote control unit,
point it at the TV.
1 INPUT: Select a TV input source.
(See page 25.)
2 0-9: Set the channel.
3 ENT: Jumps to a channel after selecting
with the 0-9 buttons.
4 FLASHBACK: Press to switch to the
previously tuned channel or external input
mode. Press again to switch back to the
currently tuned channel or external input
mode.
5 AUDIO: Display the MTS/SAP setting
menu. (See page 26-27.)
26
6 MUTE: Mute the sound. (See page 25.)
7 CH A/v : Select the channel.
(See page 25.)
8 MENU: Display the menu screen.
9 PC: Direct switch PC source.
10 A/v/4/l, , ENTER:Select a desired item
on the screen. (See page 3t .)
11 RETURN: Return to the previous menu
screen.
12 FAVORITE OH:
A, B, C, D: Select 4 preset favorite channels
in 4 different categories. (See page 34 for
details.) While watching, you can toggle the
selected channels by pressing A, B, C and D.
13 AV MODE: Select an adjusted picture
settings. (Standard, Movie, Power Saver
User, Dynamic) (See page 26.)
14 VIEW MODE: Select the Picture Mode.
(See page 28.)
15 /_ :Only for USB.
16 POWER: Switch the power on or enters
standby mode. (See page 19.)
17 • (DOT}: (See page 25.)
18 DISPLAY: Display the current channel
(or input source) information on the screen.
19 FREEZE: Set the still image. Press again to
return to normal screen.
20 VOL ÷ /- : Set the volume. (See page 25.)
21 SURROUND: Display the surround setting
menu. (See page 26.)
22 TV: Direct switch TV source.
23 USB: Direct switch USB source.
24 EXIT: Turn off the menu screen.
25 SLEEP: Allows you to set a time when the
TV automatically switches to standby. This
display will disappear after a few seconds,
and the sleep timer automatically starts
counting down. (See page 25.)
CC: Display captions during closed-caption
source.(See page 27.)
(D-16
To Next Page
Loading...
