Optional system
View options
Optional System (Continued)
Audio Description (DTV input mode only)
This function allows to adjust the volume level of the
audio descriptor if the TV receives a signal that
includes the audio descriptor.
HWidescreen
You can manually choose the size of the image
that appears on your screen.
The selectable image size varies according to the type
of signal received.
Pressa/bwhile the widescreen mode menu is
displayed on the screen.
Power control
H4:3 aspect ratio (Only for input mode
into DTV)
4:3 mode allows you to choose between “Normal”
and “Screen”.
Power control settings save energy.
Switch between multiple audio languages
Every clickMPXon the remote control will
switch the audio language.
HNo signal off
You can set the TV to automatically power off for
about 15 minutes after the TV is in a state where no
program signal is received. (On, Off)
Item is
select
Describe
The first audio language
+ AD (if any)
•
As you scroll down the options, each mode is immediately
reflected on the TV.
Normal
Keep the aspect ratio 4:3 or 16:9.
The first audio language
Full screen
The image is wide, without the two side stripes.
Second audio language
+ AD (if any)
•
Five minutes before power off, remaining time will be displayed
every minute.
• • • •
Second audio language
Item (for [Standard Definition] SD signals)
Jar
often
Maintain the same aspect ratio in full
screen display.
Screen Type 4:3
ATTENTION
ATTENTION
4:3 . screen ratio
"Normal"
4:3 . screen ratio
“Full screen”
•
This function is valid only if the broadcaster transmits the audio
description.
•
When a TV program ends, and the TV receives a signal
input, this function may not work.
Zoom 14:9 14:9 aspect ratio. A thin stripe appears on
each side of the screen, and stripes can be
seen at the top and bottom of the frame
for some programs.
For the Deaf (DVB Subtitles)
HInactive Off
You can set the TV to automatically power off when the TV
does not receive the remote control for more than 3 hours.
(Off, 3 hours, 30 minutes)
Each time you press [ on the remote control, the subtitles
will switch when the broadcast contains subtitle
information.
Overview In this mode, the image will be stretched
at the edges of the screen. The picture
may appear like “Full screen” depending
on the broadcast signal.
•
Five minutes before power off, remaining time will be displayed
every minute.
HAuto-expand (For input mode only
into DTV)
Auto-scaling allows the TV to switch between
different picture sizes automatically. (On off)
Set “For the Deaf” to “On”
Full screen
image
For 16:9 compressed images.
(For the visually impaired) 1st language
Theater 16:9 For a 16:9 mailbox style image. Bars may
appear at the top or bottom with some
programs.
Turn off• • • • • • • •
2nd language
ATTENTION
Set “For the Deaf” to “Off”
•
Use “Widescreen” if an image is not converted to the right
size. When the broadcast signal does not contain aspect
ratio information, the function will not work even when
enabled.
Theater 14:9 For a 14:9 mailbox style image. Bars may
appear at the top or bottom with some
programs.
1st language 2nd language
Turn off• • • •
(For the visually impaired)
Item (for [High Definition] HD signals)
HChange the sound
ATTENTION
Full screen
image
Display image with loss of angle. Cut
all sides of the screen.
MPX
Allows you to change the sound while watching
a polyphonic program. (Auto, MONO)
•
This function is only valid if the station broadcasts
multilingual subtitles.
Screen
small
The screen is small enough only when
receiving 720p/1080p/1080i signal
(LC-32LE280X only)/720p signal
(LC-40LE280X only). Display optimized
High-Resolution images. Noise may
appear at the edge of the screen with
some programs.
Digital Audio Language
Set two desired multi-audio languages to display
if audio languages are available.
(1st Language, 2nd Language)
Bilingual
Choose from 3 mode types: Double I, Double II and
Double I + II.
Only sound
When listening to music from a music program, you
can turn off the screen to enjoy the music only.
ATTENTION
Point by point Display an image with the same number of
pixels on the screen (only when receiving 1080i/
1080p signals for LC-40LE280X).
•
If the audio for the selected language is not included in
the received broadcast, the audio will not be output for
that language.
Selected item Describe
Turn off Both the image and the sound on
the screen are output.
HChange subtitles
You can display subtitles for the hearing impaired
in Teletext broadcasts if subtitle languages are
available.
(1st Language, 2nd Language)
ATTENTION
• “Zoom 14:9” and “Theater 14:9” will appear only for TV
mode.
•
Some entries do not appear depending on the received
signal type.
Open The sound is output without the
image on the screen.
ATTENTION
•
When you perform picture-changing operations on the TV
such as by changing the input source, the Sound Only
function is set to “Off”.
ATTENTION
•
If subtitles for the selected language are not available in the
recorded broadcast, the subtitles will not be displayed for
that language.
19 20
To Next Page
Loading...
