USBMultimedia (Continued)
Appendix
List of files compatible with USB mode
Troubleshoot
USB Device/File System USB/FAT32 . Memory
The problems described below are not always caused by a glitch. Please check the TV again before fixing it.
Image file format JPEG (.jpg)/PNG/BMP
Music file format (Depending on the
bitrate, the files may not be played.)
MP3 (.mp3) Bitrate: 32k, 40k, 48k, 56k, 64k, 80k, 96k, 112k, 128k, 160k,
192k, 224k, 256k, 320kbps
Problem Possible solutions
•
No source.
•
Check if you pressed the buttonPOWER(POWER) on the remote control yet. (See
page 12.)
If the power indicator light on the machine is red, press the . buttonPOWER(SOURCE).
•
Is the AC cord (power cord) unplugged?
•
Is the power turned on? (See page 12.)
Video file format
File extension Storage form Video Sound
Dolby Digital Plus
LPCM
ADPCM
Dolby Digital
•
The device cannot be
operated.
•
External influences such as lightning, static electricity, etc. may cause abnormal operation. In
this case, operate the unit after turning off the TV power or unplugging the AC cord (power cord)
and reconnecting it after 1 or 2 minutes.
H.264
MPEG4
Motion JPEG
* . avi AVI
•
The remote control
does not work.
•
Are the batteries installed in the correct polarity (e, f)Are not? (See page 10.)
•
Are the batteries damaged? (Replace the battery with a new one.)
•
Do you use under strong fluorescent lights?
•
Does the fluorescent light shine directly on the infrared sensor?
Dolby Digital Plus
MPEG
Dolby Digital
H.264
MPEG4
* . mkv MKV
H.264
MPEG4
Motion JPEG
Dolby Digital Plus
MPEG
Dolby Digital
* . mp4
* . mov
•
Image is cropped.
•
Are screen mode adjustments such as image size done correctly? (See page 19.)
MP4
•
Strange color, light or dark
color, or color difference.
•
Adjust image color. (See page 17.)
•
Is the room too bright? Pictures may look dark in rooms that are too bright.
•
Check the color system settings. (See pages 13 and 16.)
•
Check the Auto view HDMI input setting. (See page 16.)
LPCM
Dolby Digital
* . vob MPEG2 – PS MPEG2
LPCM
MPEG
Dolby Digital
MPG
MPEG
MPEG2
MPEG1
* . mpg/*.mpeg
•
Power turned off suddenly.
•
The internal temperature of the device increases.
Remove any objects blocking the vents and clean the vents.
•
Check the “Power Control” setting. (See page 19.)
•
Is the sleep timer set? (See page 9.)
Dolby Digital Plus
LPCM
MPEG
Dolby Digital
H.264
MPEG2
* . ts/*.trp/*.tp TS
•
No picture.
•
Is the connection to the external device done correctly? (See pages 7 and 8.)
•
Did you choose the correct input?
• “Is the “install image” correct? (See pages 17 and 18.)
•
Is the antenna properly connected? (See page 6.)
•
Is the “Open” option selected under “Audio Only”? (See page 20.)
•
No sound.
•
Is the volume too low? (See page 9.)
•
Make sure that the headset is not connected.
•
Sometimes the TV makes a
crackling sound.
•
This is not a failure. This phenomenon occurs when the TV box expands and contracts
slightly with the change in temperature. This does not affect the operation of the TV.
Notes regarding the use of the TV in high and low temperature environments
•
When the device is used in a low-temperature space (such as a room, office), the image may leave long streaks or
appear slightly delayed. This is not a failure, and the device will return to normal when the temperature returns to
normal.
•
Do not leave the device in a hot or cold place. Also, do not expose the unit to direct light or near a heater, as this may
deform the TV box and damage the LCD screen.
Storage temperatures:f20°C toe60°C.
Delete password
If you forget your password, delete it using the following procedure.
first
PressMENU(DRIVERS) to display the MENU screen, and then press CDto select “Initial installation”.
2
3
4
Pressa/bto select “Child Lock”, then pressENTER(ENTER) and the password input screen appears.
If you enter “3001” use the buttons0 – 9, the driver for setting “Child Lock” will be displayed.
Enter the 4-digit number as the password to use0 – 9. Now, the new password has been set.
3029
To Next Page
Loading...
