Sharp AQUOS LC-46D64U

Useful adjustment settings
Press ...... /~ to select "Yes", and then press
ENTER.
• "Now initializing ... " displays on the screen and
blinks.
• After the reset has completed, the
power shuts
off and then
comes back on. The screen will have
returned to its original settings.
Press ./T to select "Reset", and then press
ENTER.
• If you already set the Secret No., input the 4-digit
secret number here. See page
41 for setting a
secret number.
• "Return
to the factory preset values" displays on
the screen.
Press ...... /~ to select "Yes", and then press
ENTER.
• "Now, TV will restart automatically. OK?" displays
on the screen.
• The Channel Setup settings will not be changed.
• The Language settings will not be changed.
• The Secret number settings will not be changed.
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
Press
MENU to display the MENU screen, and
then press
...... /~ to select "Setup".
Press
MENU to exit.
Press
.FY to select "Position", and then
press
ENTER.
Press ./T to select "H-Pos." or "V-Pos.".
Example
Press MENU to display the MENU screen, and
then press
...... /~ to select "Setup".
Press
...... /~ to adjust the item to the desired
position.
• For resetting adjustments to the factory preset values,
press
1./'" to select "Reset", and then press ENTER.
• When connecting a PC to the HOMI terminal, the image
position will be automatically adjusted. It cannot be
manually adjusted.
• The screen position variable ranges depend on the View
Mode or the signal type. The ranges can be seen on the
position-setting screen.
• Adjustments are stored separately according to input
source.
-
. ~ ....
-.
1\1l:FI,·
H-Pos.
Centers the image by moving it to the left
or right.
V-Pos.
Centers the image by moving it up or
down.
For adjusting a picture's horizontal and vertical
position.
You can also select a language from the Setup menu.
Select from among 3 languages: English, French and
Spanish.
Press
MENU to display the MENU screen, and
then press
...... /~ to select "Setup".
Press
./T to select "Language", and then
press
ENTER.
Press ./T to select the desired language
listed on the screen, and then press
ENTER.
Press MENU to exit.
@- 33
Useful adjustment settings
Press ...... /~ to select "Yes", and then press
ENTER.
• "Now initializing ... " displays on the screen and
blinks.
• After the reset has completed, the
power shuts
off and then
comes back on. The screen will have
returned to its original settings.
Press ./T to select "Reset", and then press
ENTER.
• If you already set the Secret No., input the 4-digit
secret number here. See page
41 for setting a
secret number.
• "Return
to the factory preset values" displays on
the screen.
Press ...... /~ to select "Yes", and then press
ENTER.
• "Now, TV will restart automatically. OK?" displays
on the screen.
• The Channel Setup settings will not be changed.
• The Language settings will not be changed.
• The Secret number settings will not be changed.
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
Press
MENU to display the MENU screen, and
then press
...... /~ to select "Setup".
Press
MENU to exit.
Press
.FY to select "Position", and then
press
ENTER.
Press ./T to select "H-Pos." or "V-Pos.".
Example
Press MENU to display the MENU screen, and
then press
...... /~ to select "Setup".
Press
...... /~ to adjust the item to the desired
position.
• For resetting adjustments to the factory preset values,
press
1./'" to select "Reset", and then press ENTER.
• When connecting a PC to the HOMI terminal, the image
position will be automatically adjusted. It cannot be
manually adjusted.
• The screen position variable ranges depend on the View
Mode or the signal type. The ranges can be seen on the
position-setting screen.
• Adjustments are stored separately according to input
source.
-
. ~ ....
-.
1\1l:FI,·
H-Pos.
Centers the image by moving it to the left
or right.
V-Pos.
Centers the image by moving it up or
down.
For adjusting a picture's horizontal and vertical
position.
You can also select a language from the Setup menu.
Select from among 3 languages: English, French and
Spanish.
Press
MENU to display the MENU screen, and
then press
...... /~ to select "Setup".
Press
./T to select "Language", and then
press
ENTER.
Press ./T to select the desired language
listed on the screen, and then press
ENTER.
Press MENU to exit.
@- 33