Watching
TV
You can change channels
in
several ways.
o
-
VOL
+ v
CH
A..
INPUT
POWER
Method
1
Using CH
/\/V
on the remote control unit
or
on the
1V.
Method
2
1 Press FLASHBACK
to
switch
to
the previously tuned
channel.
2 Press FLASHBACK again
to
switch
back
to
the
currently tuned channel.
•
FLASHBACK
will not work if no channel has been
changed after the TV
is
turned on.
Method
3
Using remote control buttons
0-9,
• (DOT)
to
select
channels for VHF/UHF/CA1V/DIGITAL.
VOL
SURROUND
j+)
aU
INPUT
FLASHBACK
o
CH
MUTE
o
To
select
a 1
or
2-digit
channel
number
(e. g., Channel 5):
Press 5---7ENT
@-18
FREEZE
MENU
a~a
8@8
EXIT
~
RETURN
o~o
- FAVORITE CH -
@@@@
AQuas
SHARP
• When selecting a 1-digit channel number, it
is
not
necessary
to
press 0 before the number.
• When you enter
0-9
only, channel selection will be made if
there
is
no operation within a few seconds.
To
select
a
3-digit
channel
number
(e. g., Channel 115):
Press
1---71---75---7ENT
To
select.a
4-digit
channel
number
(e. g., Channel 22.1):
Press 2
---72---7
• (DOT)
---71---7ENT
• When you enter
0-9
only, channel selection will be made if
there
is
no operation within a few seconds.
•
If
you push "0" by itself, nothing will happen.
• Complete the above steps within a few seconds.
• When you enter
0-9
and •
(OOT)
, channel selection will be
made if there
is
no operation within a few seconds.
To Next Page
Loading...
