Basic adjustment settings
Use the following buttons on the remote control to
operate the menu.
CD
CD
CD
0®®
CD®®
0(Q)@
INPUT
FLASHBACK
00
VOL CH
SURROUND
j+)
(JMUTE
aU
v a
RETURN
a •
- FAVORITE CH -
0®@@
AQuas
Example
CD
Item displayed
in
yellow
• This indicates the item currently selected.
• Press
ENTER to go to the adjustment screen for
this item.
® Item
in
brackets
• This indicates the current setting for the item.
® Item displayed
in
white
• This indicates
an
item can be selected.
® Item displayed
in
grey
• This indicates that the item cannot be selected.
There are various reasons why items cannot be
selected, but the main reasons are
as
follows:
- Nothing
is
connected to the selected input terminal.
- The function
is
not compatible with the current input
signal.
..
IT
I
......
/~:
Press to select a desired item
on
the
screen or adjust a selected item.
MENU:
ENTER:
Press to open or close the menu screen.
Press to go to the next step or complete
the setting.
• Menu options differ
in
the selected input modes, but the
operating procedures are the same.
• The screens
in
the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
RETURN: Press to return to the previous step.
The bar above
is
an
operational guide for
the remote control. The bar will change
in
accordance with each menu setting screen.
@-21
To Next Page
Loading...
