@-2
IMPORTANT
INFORMATION
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG
TO
WIDE SLOT, FULLY INSERT.
CAUTION:
DO
NOT PLACE THIS PRODUCT ON AN UNSTABLE
CART,
STAND, TRIPOD, BRACKET, OR
TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS
DAMAGE TO THE PRODUCT. USE ONLY WITH A
CART;
STAND, TRIPOD, BRACKET,
OR
TABLE
RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE
MANUFACTURER'S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING
ACCESSORIES RECOMMENDED BY THE MANUFACTURER. A PRODUCT AND CART
COMBINATION SHOULD BE MOVED WITH CARE. QUICK STOPS, EXCESSIVE FORCE, AND
UNEVEN SURFACES MAY CAUSE THE PRODUCT AND CART COMBINATION TO OVERTURN.
WARNING: FCC Regulations state that any unauthorized changes
or
modifications
to
this equipment
not
expressly
approved
by
the manufacturer could void the user's authority
to
operate
this
equipment.
CAUTION:
This
product
satisfies FCC regulations when shielded cables and connectors are used
to
connect
the
unit
to
other
equipment.
To
prevent electromagnetic interference with electric appliances such as radios and televisions, use
shielded cables and connectors
for
connections.
DECLARATION OF CONFORMITY:
SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-46D82U/LC-52D82U
This device complies with Part 15 of the FCC Rules. Operation
is
subject
to
the following
two
conditions:
(1)
This device may not cause harmful interference, and
(2)
this device must accept any interference
received, including interference that may cause undesired operation.
RESPONSIBLE
PARTY:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah,
New
Jersey 07430-2135
TEL: 1-800-BE-SHARP
For Business Customers: URL http://www.sharpusa.com
INFORMATION:
This equipment has been tested and found
to
comply with the limits for a Class B digital device, pursuant to Part 15 ofthe
FCC
Rules. These limits are designed to provide reasonable protection against harmful interference
in
a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in
accordance with the instructions, may cause harmful interference
to
radio communications. However, there
is
no guarantee
that interference will not occur
in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is
encouraged to try to correct
the interference by one
or
more of the following measures:
- Reorient or relocate the receiving antenna.
-Increase
the separation between the equipment and receiver.
- Connect the equipment into
an
outlet
on
a circuit different from that
to
which the receiver
is
connected.
- Consult the dealer
or
an
experienced radiolTV technician for help.
"Note to
CATV
system
installer:
This
reminder
is
provided to
call
the
CATV
system
installer's attention
to
Article 820-40 of the
National Electrical
Code
that provides guidelines for proper grounding
and,
in
particular,
specifies that the
cable
ground
shall
be
connected to
the
grounding
system
of
the
building,
as
close to
the
point of
cable
entry
as
practical."
This
product utilizes tin-lead
solder,
and
fluorescent
lamp
containing a
small
amount of
mercury.
Disposal
of
these
materials
may
be
regulated due to environmental considerations.
For
disposal or recycling information,
please
contact your
local
authorities or
the
Electronic Industries Alliance: www.eia.org
Trademarks
• Manufactured under license from Dolby Laboratories.
"Dolby"
and
the
double-D symbol are trademarks
of
Dolby
Laboratories.
• "HDMI,
the
HDMIIogo
and High-Definition Multimedia Interface are trademarks
or
registered trademarks
of
HDMI
Licensing LLC."
• Products that have earned the ENERGY
STAR®
are designed
to
protect
the
environment through superior energy
efficiency.
To Next Page
Loading...
