Useful adjustment settings
The following modes are available for HD programs.
FREEZE
MENU
o 0
888
EXIT
""-_
RETURN
o ·
..
,'.,f,·
0
Stretch:
Suitable for viewing wide-screen 1.78:1 aspect ratio program,
stretch mode will still show very thin black bands at the top
and bottom
of
the screen.
Dot by Dot (1080i/p only):
Detects the resolution of the signal and displays
an
image with
the same number
of
pixels on the screen.
Press VIEW MODE.
• The View Mode menu displays.
• The menu lists the View Mode options
selectable for the type
of
video signal currently
being received.
Press VIEW MODE
or
#./T
while the View
Mode menu
is
displayed
to
select a desired
item on the menu.
• You can sequentially select a View Mode that
has its own aspect ratio.
Full Screen (720p only):
You can select "Full Screen" only when receiving a 720p
signal.
S.Stretch (Smart stretch):
Suitable for stretching 4:3 programs to
fill
the screen.
Zoom:
Suitable for viewing wide-screen 2.35:1 aspect-ratio programs
in
full screen.
• When using Dot by Dot, it
is
possible to see noise or
bars around different outer portions of the screen. Please
change view mode
to
correct this.
Side Bar:
Suitable for viewing conventional 4:3
programs
in
their normal format.
o
o
S.Stretch (Smart stretch):
Suitable for stretching 4:3 programs
to
fill
the screen.
@-34
Zoom:
Suitable for viewing wide-screen
2.35:1 anamorphic DVDs
in
full
screen.
Stretch:
This'
mode
is
useful for 1.78:1 DVDs.
When viewing 1.85:1 DVDs, stretch
mode
will still show very thin black
bands at the
top
and bottom
of
the
screen.
To Next Page
Loading...
