26
Switching the analogue audio format
You can switch between multiple audio modes
when watching a multiple audio or stereo broadcast
programme.
When receiving a monaural signal
Each time you press MPX, the mode switches
between NICAM MONO and MONO.
Watching TV
NOTE
• “BBC2” and “99” are tentative channel label name and
channel.
In the NICAM TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches
between NICAM STEREO and MONO.
When receiving a bilingual signal
Each time you press MPX, the mode switches among
NICAM CH A, NICAM CH B, NICAM CH AB and
MONO.
In the TV mode of A2 TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches
between STEREO and MONO.
When receiving a monaural signal
When you press MPX, “MONO” displays.
When receiving a bilingual signal
Each time you press MPX, the mode switches among
CH A, CH B and CH AB.
Stereo mode
STEREO
B/G PAL B/G PAL
NICAM
99A-TV
BBC2
MONO
99A-TV
BBC2
Bilingual mode
B/G
CH A
PAL
NICAM
99A-TV
BBC2
B/G
CH B
PAL
NICAM
99A-TV
BBC2
MONO
99A-TV
BBC2
CH AB
B/GPALB/GPAL
NICAM
99A-TV
BBC2
Monaural mode
MONO
B/GPAL B/GPAL
NICAM
99A-TV
BBC2
MONO
99A-TV
BBC2
Stereo mode
B/G
STEREO
PAL
99A-TV
BBC2
B/G
MONO
PAL
99A-TV
BBC2
Bilingual mode
B/G
CH A
PAL
99A-TV
BBC2
B/G
CH B
PAL
99A-TV
BBC2
B/G
CH AB
PAL
99A-TV
BBC2
Monaural mode
MONO
99A-TV
BBC2
Reducing the start-up time
You can reduce the TV's start-up time after the turning
on the power with the remote control unit.
Press
a
/
b
to select “Standby Mode”, and
then press ENTER.
3
Press
a
/
b
to select “Mode 1” or “Mode 2”,
and then press ENTER.
4
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Setup”.
2
Selected item Description
Mode 1* TV starting time is approximately
1 second from standby.
Mode 2 Power consumption is small during
standby.
Press MENU to exit.
5
* Standby power consumption in Mode 1 setting is
approximately 54W.
52D84X_en_d.indd 2652D84X_en_d.indd 26 5/29/2008 9:34:31 AM5/29/2008 9:34:31 AM
To Next Page
Loading...
