Using AQUOS LiNK
i FREEZE MENU
:o o
1 Press MENU to display the MENU screen, and then
press 4/!_ to select "Option".
2 Press A/T' to select "AQUOS LINK Setup", and
then press ENTER.
3 Press A/T to select a specific item, and then press
ENTER.
4 Press A/Y (or 4t/!_ ) to select the desired setting,
and then press ENTER.
5 Press MENU to exit.
Select AQUOS LINK Control to disable AQUOS LINK
function even when an AQUOS LINK-compatible HDMI
device is connected to the TV. This function prevents
the device from starting to operate unexpectedly.
Enable: You can operateAQUOS LINK-compatible
equipment.
Disable: AQUOS LINKfunction does not work.
When multiple AQUOS LINK-compatible devices are
connected, this function allows you to set the recorder
for recording when you press REO on the TV's remote
control unit.
Press A/V to select the recorder for recording.
Example
Selecting Recorder
Example : when connecting AQUOS LINK-compatible
recorder via AQUOS MNK-compatible Audio
system
Selecting Recorder
When an AQUOS LINK-compatible audio system or
other equipment is connected between the TV and
recorder, "Sub" is displayed.
If this is activated, the One Touch Play function is
enabled.
Yes: While the TV is in standby mode, it automatically
turns on and plays back the image from the HDMI
source,
No: This function does not work.
This function allows easy one-touch recording of the
program being viewed on the TV to AQUOS LINK-
compatible equipment with a recording function by
simply pressing REC on the remote control.
SOURCE LIGHT
6E) OD E£)
REC
6E) (ED @
Prepare the connected AQUOS LINK-compatible
recorder for recording. Check the following items.
o Make sure that the antenna cable is connected.
o Check that there is sufficient available space on the
recording media (HDD, DVD, etc.).
o On the TV, use "AQUOS LINK Setup" and "Selecting
Recorder" to select the equipment for recording.
o By default, the recorder connected to INPUT 5 is selected
for recording.
1 Press REC to start recording.
o When you are viewing a broadcast received with
the AQUOS LINK-compatible recorder selected in
"Selecting Recorder", recording to the AQUOS recorder
of the broadcast being viewed starts.
o When you are viewing a broadcast received with
equipment other than the AQUOS LINK-compatible
recorder selected in "Selecting Recorder" or other
external input equipment, pressing REC on the remote
control does not start recording.
2 Press REC STOP to stop recording.
Q- 39
To Next Page
Loading...
