Sharp AQUOS LC-46LE925RU

15
Searching for satellite broadcasts
Press c/d to select “Yes”, and then press ;.
Yes
No
• If you do not perform “Satellite search” setting, select
“No”, and then press ;.
• The current DVB-S/S2 setting screen is displayed.
Next
other
Satellite
LNB Frequency
Low High
Satellite System
Max. 4 satellites on DiSEqC multiswitch
Change setting
• You must first complete “Change setting” before moving
to the “Next” setting.
1 When starting the satellite search
after setting the scrambled stations:
Press c/d to select “Next”, and then press
;.
NOTE
• When you perform the initial auto installation, “Next” cannot be
selected. Completing “Change setting” enables you to select
“Next”.
Start search
other
Satellite Symbol rate 1 Symbol rate 2
Scrambled stations: No
Change setting
E Start search:
DVB-S/S2 channel searching.
1 Press c/d to select “Start search”, and then
press ;.
2 The TV searches for and stores all the
receivable TV stations according to their
settings and the connected antenna.
• Select “Yes” to sort the search result in alphabetical
order.
• To abort the initial auto installation in progress, press 6.
E Change setting:
1
Press c/d to select “Change setting”, and
then press ;.
• The setting screen of “Scrambled stations” and “Symbol
rate” is displayed.
Scrambled stations [No]
Search start
SAT1-Symbol rate 1
SAT1-Symbol rate 2
SAT2-Symbol rate 1
Yes No
2 Press a/b to select “Scrambled stations”,
and then press ;.
• Scrambled stations: Specifies if you need to add pay-TV
services.
3 Press c/d to select “Yes”, and then press
;.
4 Press a/b to select the symbol rate you
want to modify, and then press ;.
• Symbol rate: You need to set each symbol rate of all
the satellite broadcasts that the TV can receive (eight
is the maximum number of symbol rates that can be
displayed).
5 Press c/d to select “Search start”, and then
press ;.
6 The TV searches for and stores all the
receivable TV stations according to their
settings and the connected antenna.
• Select “Yes” to sort the search result in alphabetical
order.
• To abort the initial auto installation in progress, press 6.
Quick guide
LC-46LE925EGBver4.indd15LC-46LE925EGBver4.indd15 2010/08/0710:58:162010/08/0710:58:16