Sharp AQUOS LC-46LE925RU

71
Appendix
Updating your TV via USB/
network
Information
Software update
This function allows you to update to the latest software
via a USB device or network.
• To check the software version for the TV, use the URL shown
on the back cover.
1 Go to “Menu” > “Setup” > “Information” >
“Software update” > “USB update”.
• You can also update the software through the network.
Go to “Menu” > “Setup” > “Information” > “Software
update” > “Network update” and follow the on-screen
instruction.
• A broadband connection and Network setup are required
to update the software using the internet (Page 55).
2 Press ; and then insert the USB device
containing the software update file.
CAUTION
• Be sure to insert the USB device correctly into the terminal.
3 The TV displays a confirmation screen while
checking the data in the inserted USB device.
CAUTION
• If the data is not compatible with the system, an error message
appears on the screen. Repeat steps 2 and 3 after pressing
;.
• When an error message displays, check to see if:
• The USB device is inserted firmly.
• The USB memory has two or more software update files.
• No data for updating the system exists in the USB
memory.
• The software update file is broken.
• The software update file is not compatible with your TV’s
software.
• The current system is same as the system update data.
4 The TV displays the software version
information after checking the data.
5 Press c/d to select “Yes” to update the
system, and then press ;.
6 The TV restarts automatically, and the
software update will be complete.
• This operation may take a while.
LC-46LE925EGBver4.indd71LC-46LE925EGBver4.indd71 2010/08/0710:59:202010/08/0710:59:20