Sharp AQUOS LC-46LE925RU

7
Introduction
Operation without a remote control unit
This function is useful when there is no remote control unit within your reach.
1 Press @- and the “Menu” screen displays.
2 Press !s/r instead of a/b or Yl/k instead of c/d to select
the item.
3 Press #b to complete the setting.
About the guide display
The guide display below the menu bar shows operations for the OSD.
• The bar above is an operational guide for the remote control unit. The bar will
change in accordance with each menu setting screen.
SetupCH list
:Back:Enter
:Select
Using Software keyboard
The software keyboard appears when you need to input text.
Char.Set
Cursor Left Cursor RightCaps Char.Set
123 ./@abc
Caps a b c d e f
ghi jk l
mnopq r
stuvwx
yz: /.SP
Done Clear
DeleteCancel
R G Y B
END
1
8
76
2
3
4
9
10
11
5
1 Char. set
Changes character set into the
alphabet, numbers, symbols, etc.
2 Caps
Changes characters to capital/
lower case.
3 Done
Confirm the entry.
4 Cancel
Abort input and close the software
keyboard.
5 R/G/Y/B (Colour) buttons
Selects the coloured items on the
screen.
6 Input cursor
Press c/d to move the cursor
when highlighted.
7 Input field
The text you enter is displayed as
you type it in.
8 Character
Input characters by using these
buttons.
9 ?
Put a line break.
0 Clear
Erases the character string.
• When the cursor is somewhere
in a line: the character string to
the right of the cursor will be
erased.
• When the cursor is at the right
end of a line: the entire line will
be erased.
Q Delete
If the cursor is at the right end of a
line, this erases text one character
at a time.
• You can also delete text by
pressing 6 on the remote
control unit.
LC-46LE925EGBver4.indd7LC-46LE925EGBver4.indd7 2010/08/0710:58:032010/08/0710:58:03