EasyManua.ls Logo

Sharp AQUOS LC-46LX530H

Sharp AQUOS LC-46LX530H
81 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
Remote control unit (Continued)
SLEEP
OPC
POWER
SLEEP
OPC
POWER
VOL
k
/
l
(Volume up/down) buttons
CH
r
/
s
(Channel up/down) buttons
POWER (On/Off) button
TV/VIDEO button
MENU button
Remote control sensor
POWER indicator*
OPC sensor
OPC indicator**
The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from
the actual operations.
The illustrations used throughout this manual are based on LC-46LX530H.
Light off Power off
Light (Red) The TV is in standby mode.
Light (Green) The TV is on.
* POWER indicator
Part names
TV (Front / Side)
Inserting the battery
Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become depleted
and the remote control fails to operate, replace the batteries with new “AAA” size battery.
1
Open the battery cover.
2
Insert the supplied “AAA” size batteries.
3
Close the battery cover.
Place
batteries
with their terminals corresponding to the (e)
and (f) indications in the battery compartment.
CAUTION
Do not mix batteries of different types. Different types of batteries have different characteristics.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage
in old batteries.
Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any chemical
leakage, wipe thoroughly with a cloth.
The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
Batteries (batteries pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
**
OPC (Optical Picture Control) indicator
Light off “Off” is selected in the OPC setting.
Lighted (Green)
“On” or “On: Displayis selected in the
OPC setting.
SLEEP timer indicator
LC40LX530H_pg01-16_EN.indd 10 2011-6-27 16:58:14

Table of Contents

Related product manuals