16
Specifi cations
Item
LCD panel with LED backlight 49.50” (1257.3 mm) Advanced Super View & BLACK TFT LCD
Resolution 2,073,600 pixels
(1920
g
1080)
Video Colour System PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
TV
Function
TV-Standard PAL: B/G, D/K, I SECAM: B/G, D/K, NTSC3.58 : M
Receiving
Channel
VHF/UHF 44.25 — 863.25 MHz
TV-Tuning System Analog 199 carrier
STEREO/BILINGUAL NICAM/A2 Dual/US Stereo
Audio amplifi er
9 W
g
2
Terminals
Antenna
UHF/VHF 75
q
AV VIDEO RCA pin(AV input)
VIDEO RCA pin(AV output)
COMPONENT
Y :Composite Input, RCA
g
2 (Pb,Pr) Audio Input 1 Alternative
HDMI 1 HDMI in with HDCP, (PC Monitor Audio Input Alternative)
HDMI 2 HDMI in with HDCP
PC 15 pin mini D-sub, AUDIO in (Ø 3.5 mm jack)
USB USB for multimedia player function (photo, music, movie and text)
Headphone Ø 3.5 mm jack
OSD language
English/French/Portuguese/Arabic/Persian/Simplifi ed Chinese/Thai/Vietnamese/Indonesian/Russian/
Malay/Spanish
Power Requirement AC 110 — 240 V, 50/60 Hz
Power Consumption 125 W (1 W Standby)
Dimensions
without stand (mm)
1,155.0 (W)
g
690.6 (H)
g
77.8 (D)
with stand (mm)
1,155.0 (W)
g
726.0 (H)
g
246.0 (D)
Weight without stand (with stand) 16.5 kg (17.5 kg)
Operating Temperature 0°C — +40°C
• As a part of policy of continuous improvement, SHARP reserves the right to make design and specifi cation changes for product
improvement without prior notice. The performance specifi cation fi gures indicated are nominal values of production units. There
may be some deviations from these values in individual units.
CAUTION
• Installing the Liquid Crystal Television requires special skill that should only be performed by qualifi ed service personnel.
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting
that results in accident or injury.
• Carefully read the instructions that come with the bracket before beginning work.
• The TV screen may fail to display component input signals from the following source equipment:
- Source equipment that intermix NTSC and PAL formats.
- Output from an old VHS deck.
- Devices such as old game consoles with signal outputs other than NTSC/PAL format.
This product does not support the direct input of the aforementioned source equipment. When connecting the above
mentioned source equipment, run the equipment’s signal output through correction devices such as a Time Base Corrector (TBC)
or Frame Synchronizer (FS).
J3QQ1401C_EN.indd 16J3QQ1401C_EN.indd 16 5/27/2013 2:03:25 PM5/27/2013 2:03:25 PM
To Next Page
Loading...
